This Authorized Cisco 5-day course gives you the knowledge and skills required to design, implement, and troubleshoot Quality of Service (QoS) on a network. The course addresses the essential QoS technologies and applications for both Service Provider and Enterprise networks. Successful implementation of the techniques taught in this course will have a dramatic impact on critical network application performance.
What You'll Learn
- Building blocks of IP QOS
- Configure AutoQoS on WAN routers and on Catalyst access switches and monitor the results
- Configure FIFO and WFQ queuing on WAN routers and measure and analyze network performance
- Configure WRED on WAN routers to control which traffic is dropped during congestion
- Configure CBWFQ and LLQ on WAN routers to provide bandwidth and latency guarantees
- Configure COS-to-queue mapping and WRR queuing on the Catalyst 2950 switch
Who Needs to Attend
- Network professionals interested in deploying state-of-the-art QoS techniques to support multimedia traffic would benefit from this course.
Course Outline
1. Introduction to IP QoS
- Understanding the Need for QoS
- Understanding QoS
- Implementing QoS
2. The Building Blocks of IP QoS
- Identifying Models for Implementing QoS
- The Integrated Services Model
- The Differentiated Services Model
- Identifying QoS Mechanisms
- QoS in the Life of a Packet
3. Introduction to Modular QoS CLI and AutoQoS
- Modular QoS CLI
- Cisco AutoQoS VoIP
- Cisco AutoQoS Enterprise
4. Classification and Marking
- Understanding Classification and Marking
- Using MQC for Classification
- Using MQC for Class-Based Marking
- Using NBAR for Classification
- Configuring QoS Pre-Classify
- Configuring QoS Policy Propagation Through BGP
- Configuring LAN Classification and Marking
5. Congestion Management
- Introducing Queuing
- Understanding Queuing Implementations
- Configuring FIFO and WFQ
- Configuring CBWFQ and LLQ
- Configuring LAN Congestion Management
6. Congestion Avoidance
- Introducing Congestion Avoidance
- RED
- Configuring Class-Based Weighted RED
- Configuring Explicit Congestion Notification
7. Traffic Policing and Shaping
- Understanding Traffic Policing and Shaping
- Configuring Class-Based Policing
- Configuring Class-Based Shaping
- Configuring Class-Based Shaping on Frame Relay Interfaces
- Frame Relay Voice-Adaptive Traffic Shaping and Fragmentation
8. Link Efficiency Mechanisms
- Understanding Link Efficiency Mechanisms
- Configuring Class-Based Header Compression
- Configuring Link Fragmentation and Interleaving
9. QoS Best Practices
- Understanding Traffic Classification Best Practices
- Deploying End-to-End QoS
- Providing QoS for Security
Labs
Lab 1: QoS Lab Setup and Initialization
Initial router and switch configuration; familiarization with the lab environment.
Lab 2: Baseline QoS Measurement
Network performance testing with and without application traffic loads.
Lab 3: Classification and Marking Using MQC
Configure MQC classification using ACLs. Configure and monitor Class-Based Marking.
Lab 4: Classification Using NBAR
Configure NBAR protocol discovery. Configure MQC Classification via NBAR.
Lab 5: LAN-Based Packet Classification and Marking
Configure Catalyst trust boundaries and COS-to-DSCP mapping. Configure MQC classification and marking on Catalyst switch.
Lab 6: Configuring QoS Pre-Classify
Configure QoS pre-classify on a router using a GRE tunnel. Monitor the operation of QoS pre-classification.
Lab 7: Configuring Basic Queuing
Configure FIFO queuing on WAN routers. Configure WFQ queuing on WAN routers. Measure and analyze network performance.
Lab 8: Configuring LLQ
Configure LLQ on a WAN router to provide bandwidth and latency guarantees. Measure and analyze the results.
Lab 9: Queuing on Catalyst Switches
Configure COS-to-queue mapping on the Catalyst 2950 switch. Configure and monitor WRR queuing on the Catalyst 2950.
Lab 10: Configuring DSCP-Based WRED
Configure and monitor DSCP-Based CB-WRED. Add Explicit Congestion Notification (ECN).
Lab 11: Configuring Class-Based Policing
Configure CB-Policing and analyze the results.
Lab 12: Configuring Class-Based Shaping
Configure CB-Shaping and analyze the results.
Lab 13: Configuring Class-Based Header Compression
Configure and monitor Class-Based RTP header compression on a PPP WAN link.
Lab 14: Configuring LFI
Configure and monitor link fragmentation and interleaving on a PPP WAN link.
Lab 15: Configuring QoS with AutoQoS for VoIP
Configure AutoQoS on WAN routers and monitor the results. Configure AutoQoS on Catalyst access switches and monitor the results.
Labs
100% Enhanced Hands-On Labs
Our QoS labs are based on real VoIP and data rather than on simulated traffic. Cisco IP phones are used for voice calls in the classroom.
Lab 1: QoS Lab Setup and Initialization
Initial router and switch configuration; familiarization with the lab environment.
Lab 2: Baseline QoS Measurement
Network performance testing with and without application traffic loads.
Lab 3: Classification and Marking Using MQC
Configure MQC classification using ACLs. Configure and monitor Class-Based Marking.
Lab 4: Classification Using NBAR
Configure NBAR protocol discovery. Configure MQC Classification via NBAR.
Lab 5: LAN-Based Packet Classification and Marking
Configure Catalyst trust boundaries and COS-to-DSCP mapping. Configure MQC classification and marking on Catalyst switch.
Lab 6: Configuring QoS Pre-Classify
Configure QoS pre-classify on a router using a GRE tunnel. Monitor the operation of QoS pre-classification.
Lab 7: Configuring Basic Queuing
Configure FIFO queuing on WAN routers. Configure WFQ queuing on WAN routers. Measure and analyze network performance.
Lab 8: Configuring LLQ
Configure LLQ on a WAN router to provide bandwidth and latency guarantees. Measure and analyze the results.
Lab 9: Queuing on Catalyst Switches
Configure COS-to-queue mapping on the Catalyst 2950 switch. Configure and monitor WRR queuing on the Catalyst 2950.
Lab 10: Configuring DSCP-Based WRED
Configure and monitor DSCP-Based CB-WRED. Add Explicit Congestion Notification (ECN).
Lab 11: Configuring Class-Based Policing
Configure CB-Policing and analyze the results.
Lab 12: Configuring Class-Based Shaping
Configure CB-Shaping and analyze the results.
Lab 13: Configuring Class-Based Header Compression
Configure and monitor Class-Based RTP header compression on a PPP WAN link.
Lab 14: Configuring LFI
Configure and monitor link fragmentation and interleaving on a PPP WAN link.
Lab 15: Configuring QoS with AutoQoS for VoIP
Configure AutoQoS on WAN routers and monitor the results. Configure AutoQoS on Catalyst access switches and monitor the results.
Lab 16: Exclusive - Auto QoS for the Enterprise (Optional)
Use the Auto QoS for the Enterprise feature on Cisco routers to automatically configure QoS for data, voice, and video applications.
Lab 17: Exclusive -< Catalyst Inline Power (Optional)
Lab 18: Clean Up
